Why Is My Geek Bar Skyview Blinking
Geek Bar Skyview - One Of The Most Popular Vaping Devices On The Market But, like any electronic device, it is not free from occasional glitches. Users have reported a wide range of issues, but one that seems to be especially prevalent is its indicator light blinking. As straightforward as this signal may appear, it can be quite alarming since it usually indicates a problem lurking under the device. In this complete guide we will discuss all the reasons why your Geek Bar Skyview might be blinking and also go through some solutions step by step to help you get your Geek Bar Skyview back to optimal working condition.
Battery - Related Issues
1-1 Low Battery
Geek Bar Skyviews RUMBLING Geek Bar Skyviews Blinking averageThe number one reason why Geek Bar Skyviews is blinking is a power deficit looming. As the charge drops below a pre- set threshold, the device kicks in an internal safety feature: rapid flashes from the indicator light. This is a clear signal that its time to recharge. The reason for this feature is to avoid over - discharge of the battery which is a condition that can lead to not only poor batterys performance over time but can also lead to a batterys lifespan to cut short.
To check whether you are out of battery, just check the indicator light. A quick or nearly frenetic fluttering of the eyelids is a telltale sign. When you know this, it is important to act quickly. Use the OEM specified charger. Third - party chargers are a common option, but they often work at a voltage that is inconsistent with the device. Recovering them can put your device at risk of overheating short - circuits and irreversible battery damage.
Chargers should stick strictly to the manufacturers recommendations when charging. Depending on the charger and the current state of the battery, a full charge usually takes a couple of hours. Like everything else, overcharging is bad, like over - discharge. It can heat the battery causing it to swell and ultimately become unable to hold a charge properly. When charging has completed you will see that the indicator light has steadied, no longer blinking and shining brightly indicating that you can now use your device again.
1-2 Battery Connection Issues
A connection to the battery could be another cause for the blinking. Over time with usage and handling the contact points of the battery to the device may become loose or dirty and clogged. As a result, you could face an inconsistent power supply that leaves your device losing power which you see as the blinking indicator light.
Checking the connection is a simple enough process. Remove the battery from the device, being contestible first. Take a look at the contacts on the battery, as well as those in the device housing. Check for any discoloratation damage or physical damage. In case you see dirt or residue use a soft dry cloth or a Q-tip soaked with rubbing alcohol to gently wipe the contacts clean. Make sure they are fully dry when you put back the battery - a little bit of wetness is enough to create a short one.
If the contacts look good but the blinking doesn't stop, attempt more-forcefully reinserting the battery. Simply re - seating of the battery can sometimes fix the connection problem. If you have another compatible battery available see if that works. If it stops blinking when installing the new battery then the old battery is most likely faulty and needs replacement.
Hardware Issues
2-1 Atomizer Problems
The atomizer is the essential part inside Geek Bar Skyview for the important work of heating up the e - liquid and converting it to the vapor that users love. Issues with the atomizer may cause the devices to blink. Atomizer problems arise from many conditions which can be a clogged or burnt - out atomizer coil a damaged atomizer head or improper flow of e - liquid.
Now, if you think that atomizer is the cause of the issue, first disable the atomizer coil. A failing coil often identifiable by a dark gummy residue or burnt - out coil which could be blackened or brittle needs to be replaced. Be certain that you follow the producers instructions perfectly if changing the coil. Incompatible coils throw off the heating process of the piece leaving to uneven vapour production a burnt taste or dumping the product altogether.
If the coil appears to be okay focus on the atomizer head. A broken atomizer head will block the e - liquids path to the heating element and stop them producing energy resulting in a spotty vapor production and the device blinking. If you see cracks dents or wear and tear on the atomizer head you need to replace it.
At a some e - liquid flow problem might be at fault. However, if the e - liquid it not smoothly trapped the atomizer it causes the dry - hits and blinking. Make sure that e - liquid tank is filled to an appropriate level and air vents are clear. Shaking it lightly will help to make sure the e liquid is mixed through the whole tank.
2-2 Sensor Malfunctions
It is powered by an array of sensors that track different factors of device functionality including the status of the atomizer, the amount of charge left in the battery and the temperature. When the machine is malfunctioning, it sends the wrong signals or disrupts the normal operation of the device that makes the indicator light flickering blinking.
There are a number of factors that can lead to sensor malfunctions. Physical damage to the sensor - maybe from dropping the device, or exposing it to extreme conditions - can make it inoperable. Also less frequent but also a potential cause of this bug could be a software glitch interrupting the communication between the sensors and the devices main board. Furthermore, other electronic devices nearby may interfere with the sensor signals.
If you think there is a sensor problem, contacting the manufacturers customer service is your best option. They possess technical expertise and diagnostic equipment to walk you through a troubleshooting process. In some instances they might be able to offer you a software patch that will correct a minor glitch or they might advise sending the device in for repair or replacement if the sensor is beyond repair.
Software Issues
3-1 Firmware Glitches
It has a specific firmware package that runs everything from the battery management functions to the atomiser control. A bug in that firmware can lead to a cascade of failures, and the blinking indicator light is one of the most obvious signs. There are multiple reasons a firmware glitch may occur. An interrupted firmware update, caused by a power loss or flaky Internet link, might leave its firmware in a corrupted state. Even the manufacturers work hard to eradicate these bugs, but sometimes they are there in the code and unwanted behavior can be caused.
The first step in terms compensation of firmware glitch is updating the Firmware to the newest version. Start with the manufacturers website and go to support for your specific device model. Download the new firmware in accordance to your protocols and install following the aforementioned steps. Prior to carrying out the update it is very important to save a copy of any customized settings or information saved to the mobile as the update will overwrite them.
A factory reset might be needed if merely updating the firmware doesnt fix the issue. Resetting a computer essentially returns it to factory conditions in an effort to potentially solve software issues and remove any customizations. However, this is your last resort option as it will also erase all of your data, so make sure to back up all of your important data before resetting.
3-2 Compatibility Issues
The "Geek Bar Skyview" can also blink due to compatibility problems. With the wide range of endless options on the market, not all e - liquids and accessories come out as equal, and using products that arent compatible with your device can lead to malfunctions. In general, e - liquids can have a different viscosity or chemical composition that does not mix well with part of a devices atomizer. To turn it on you must activate a puff sensor and if it doesn't light up something is wrong.
Make sure to use only e - liquids that are designed for the Geek Bar Skyview or recommended by the manufacturer to prevent any compatibility issues. The same goes for atomizer coils batteries and chargers if you do decide to use your device for atomization make sure you have the accessory that was designed for your device. This not only helps the device run at peak performance but also prevents possible damage.
From battery - related problems to hardware malfunctions and software glitches in your Geek Bar Skyview, a multitude of reasons are possible when the Geek Bar Skyview starts blinking. You should follow these troubleshooting steps one by one to figure out what is going wrong and fix it properly.
If the issue still exists after you have attempted all your potential options, contact the customer support department of the manufacturer. With a team of experts at their disposal, they are well - prepared to tackle any issues you may face.
Keep in mind that proper care and maintenance of your Geek Bar Skyview is the good way to guarantee long term performance and reliability. As long as you handle it safely and respect the guidance provided by manufacturers, it is possible to enjoy a higher quality use of your vaping device over decades to come.
