Why Does My Geek Bar Pulse Keep Hitting
Table of Contents Preview
1- Preface2- An Preface on the Geek Bar Pulse
3- Why They Might Be Pulsating Continually
3-1 Battery - Related Issues
1- Preface
Geek Bar Pulse is one of the most popular vaping device with a sleek design and easy operation. But many users facing the issue in which the led light is continuously pulsing which is a confusing thing. This not only leads to concerns about the normal functioning of your device but also questions its safety and performance. This guide will examine why your Geek Bar Pulse is hitting and what you can do to solve the issue.
2- An Preface on the Geek Bar Pulse
2-1 How Its Supposed to Work
The Geek Bar Pulse works on a simple premise. A sensor inside detects the change in air pressure when you take a draw from the device. This activates the battery to heat the heating element that vaporizes the e-liquid stored in the cartridge. If the LED light on the device is illuminated, that signifies it is functioning. When drawing, the LED will normally blink a few times, indicating device activity. And it can also blink, signaling a low battery or a change in status.
2-2 The Role of the Battery
Geek Bar Pulse's battery is one of the most essential parts. One of it is driven to make sure that the device functions. Most Geek Bar Pulse models utilize rechargeable lithium - ion batteries. They have a defined charge capacity and voltage output. It can supply a steady voltage to the heating element when the battery is fully charged. When a battery discharges its voltage slowly decreases and a device would sometimes start behaving differently which can potentially relate to the continuous pulsing problem.
3- Why They Might Be Pulsating Continually
3-1 Battery - Related Issues
3-1-1 Low Battery
One of the most frequent reasons the Geek Bar Pulse continues to pulse is due to a low battery. This setting can alert utilizes when its reaching at low battery level where as the low battery alert will cause the device to start pulsing,Encoding is normally done on the device itself. It's possible that the pulsing is an intentional design feature used to let you know that the battery power is insufficient to provide a consistent vaping experience. Try charging the device to see if this is the case. If the pulsing continues after a considerable amount of hot charging then the culprit was the low battery.
3-1-2 Battery Malfunction
The battery itself could be at fault in some cases. This may result from a manufacturing defect of over charging or over discharging. Your battery protected the components inside until the very end, so your device could still function, but if the battery was over - charged, it may have caused damage to the internal components causing voltage fluctuations to become dangerously abnormal. In similar manner if battery discharges too frequently or it stays in discharged state for long duration it can also loss the ability of holding proper charge. If the battery begins to malfunction, the device can start to pulse on and off, as the device tries to acquire a power supply. If this is the issue, you might have to replace the battery. Note: Replacing the battery is not always covered by the Geek Bar Pulse warranty so before attempting a replacement, it is a good idea to contact the manufacturer or authorized service center for guidance.
3-2 E - Liquid and Cartridge Issues
3-2-1 E - Liquid Depletion
And low e - liquid can also cause the device to be erratic. Your heating element can become poorly saturated with e - liquid and cause you dry hits. The device may start to beat in an effort to make up for the absence of e - liquid. 3. See if the e - liquid in the cartridge is low. If associated with low refill it out if your device is refillable or you need to replace the cartridge in case of disposable.
3-2-2 Blocked Cartridge or Airflow Path
A clogged cartridge or a blocked airflow path can also cause your eliquid to pulse continuously. It can sometimes get too thick, which will clog up the small holes in the cartridge where the e - liquid is sucked into the heating chamber, or e - liquid can be contaminated. In other words, if those airflow holes on the device are blocked then the pressure sensor will fail to sense the actual air pressure resulting in the device not working correctly. You could try using a cotton swab to lightly clean the cartridge and airflow holes. But make sure you don't end up damaging the fragile parts of the device.
3-3 Hardware and Sensor Issues
3-3-1 Faulty Sensor
The air pressure sensor shows when you take a draw in the Geek Bar Pulse. A malfunctioning sensor can send inappropriate signals to the device's control circuit. This could make the device believe you are constantly taking a draw and cause it to continually pulse. If the device has been dropped, a sensor may have become physically damaged, or it could be a software - related issue. In a software - related sensor issue, the device might have to set up a firmware update. Go to manufacturers site to find any available firmware updates for your Geek Bar Pulse model. Physical Damage: If the sensor is physically damaged you may need to send the device in for repair.
3-3-2 Issues with the Heating Element
Another part of the device that can cause problems is the heating element. If it is damaged or worn out, the heating element might not be able to heat the e - liquid correctly. This will result in intermittent vapor production in some situations and continuous pulsing. Resistance to a heating element can be recognized by burnt taste in vapor or a reduction of vapor production. If you suspect a heating element problem and your device is still under warranty reach out to the manufacturer for a replacement.
User - 4- Error and Usage Habits
4-1 Over - Vaping
Could beSome users might be over - vaping which creates more stress on the device. The device may overheat through taking long continuous draws or by vaping at a very high frequency. A safety feature of the device is that if it gets too hot it may pulse. Work on taking your draws less often and for shorter intervals. Allow the device time to cool down between uses. If the nonstop pulsing stops after you adjust your vaping habits then you were probably vaping too much.
4-2 Wrong charging practices
Problems can also arise from using the wrong charger or charging the device for too long. Using a charger with a voltage output that is not correct can ruin the battery and the rest of the device. Likewise keeping the device plugged in for a longer time frame once it has achieved a full charge can over - charge the battery. Always use the charger that is included with your device or a charger specifically designed for your Geek Bar Pulse model. Make sure to also unplug the device once it's fully charged. Here are several reasons your Geek Bar Pulse may continue hitting. Bad habits and false use are also the cause of this phen Like e - liquid and cartridge problems battery - related issues hardware and sensor malfunctions, etc. If you know how the device basically works and check each of these potential causes sequentially you can often diagnose the problem and fix the device. If you continue to face the same problem even after following the fixes mentioned above, you are highly suggested to contact the respective manufacturers customer support or get it repaired at an authorized service center. This way, your Geek Bar Pulse will be repaired or serviced properly, making sure that you can experience a smooth and hassle - free vaping experience.
