Why Isn't My Geek Bar Hitting?
Table of Contents Preview
A- Battery - The Power SourceB- Coil - The Vapor Producer
C- E - Liquid - Krema e Vapingut
D - Airflow - The Breath of Vaping
E- Device Malfunctions - The Basics And More
In the vaping world, the Geek Bar gained a lot of traction due to its convenience and relatively simple technology. But like all electronic devices, users may run into the frustrating problem of a Geek Bar not "hitting" - that is to say, it doesn't draw vapor when in use. For those using their Geek Bar for their vaping needs, this can be a confusing issue. This might involve troubleshooting to pinpoint the cause, and the following list should cover the most likely reasons:
A- Battery - The Power Source
Dead Battery
A dead battery is the most common reason for a Geek Bar not hitting. Geek Bars are battery-operated devices, and after continuous usage over a period of time, these batteries lose their charge. If you've been hitting your Geek Bar often and haven't bothered to recharge it, the battery might just be dead. You can try plugging the Geek Bar into a charger to see if that's the case. Most Geek Bars come with a USB - C charge and is convenient as well as fast in relation to charging. You can tell the battery was low if the device begins to show a charging indicator (e.g. blinking light)
Charging Issues
Even if you do plug in your Geek Bar, you may face issues charging it. The charging cable may be broken. Look for any visible wear or frayed wires. And if the cable is damaged, it might not allow electricity to flow to the device and not charge your battery. The charging adapter youre using could also be faulty. To charge the Geek Bar, try a different adapter if possible or use a different USB port on your computer. In some cases, damage can also be inflicted to the port on the Geek Bar itself. If you see any debris or if the port appears to be loose it may not be making a proper charge connection.
Battery Degradation
Repeated usage can cause the battery in a Geek Bar to deteriorate. Lithium - ion batteries also have a limited number of charge - discharge cycles which are the most commonly used battery types on vaping devices such as the Geek Bar. The batterys ability to hold a charge degrades the more it is used. If your Geek Bar has previously been used for a long time and you feel that your Geek Bar no longer holds its charge like before and is failing to hit now and then, battery degradation might be to blame. Sadly, if you do experience this failure the only real solution may be to simply replace the device, because attempting to replace just the battery in a Geek Bar can actually be quite a complicated and generally non - friendly process.
B- Coil - The Vapor Producer
Clogged Coil
We can consider the coil in Geek Bar as the component of the device that heats the e - liquid, thus producing the vapor. When the coil gets clogged it can restrict the flow of e - liquid, as well as vapor production. The most common cause of clogged coil is the use of e - liquids with very high viscosity. If you are using any e - liquids (especially those with a higher VG content), these can be thick and wont wick easily through the coil. Use of certain types of products can lead to a residue build up on the coil over time that can clog the small openings.
Improper storage is another culprit for a clogged coil. Extreme heat in your environment can cause the e - liquid to expand inside your Geek Bar and seep into areas which it should not be potentially clogging the coil. Not to mention how if you leave your Geek Bar unused for a long time the e - liquid in the coil can dry and form a crusty residue clogging the device. Some try to unclog a coil by gently blowing through the mouthpiece in reverse to the way a person would normally vape. But this should be done carefully, otherwise it will harm the device if not done correctly. You can also take some housekeeping with the coil as in the same cases if the clog is severe it may need to be replaced.
Burned - Out Coil
Another common issue that can result in a Geek Bar not hitting is the coil burning out. This is usually due to overheating of the coil. Long continuous draws on the coil can lead to overheating. When you take a long draw the coil is continuously heating and if it does not have enough e - liquid to cool it down it can burn. The geek bar has a low e - liquid level. When you get to the bottom of the tank the coil may not be saturated that well which may lead to dry burning when the coil gets too hot without liquid to vaporize. A burnt coil is going to create a burnt taste and at some point no vapor. A coil that is fried will need replacing.
C- E - Liquid - Krema e Vapingut
Low E - Liquid Level
A common but easily disregarded reason for a Geek Bar to not function is a low e - liquid level. If there is not enough e - liquid in the device the coil does not have enough liquid to vaporize. The majority of Geek Bars feature a clear or translucent exterior, making it easy to see how much e - liquid you have left. When this level is low it is time to fill the device again. Although it can be important to note that some Geek Bars are single use and not suitable for refilling. In those instances a low e - liquid level indicates it's time to dispose of the device and buy a replacement.
Wrong E - Liquid Compatibility
Not all e - liquids are compatible with all vaping devices and the Geek Bar is no different. Furthermore, the issue mininto can have with the Geek Bars coil design comes if you are using an e - liquid that is not compatible in terms of a nicotine strength or blend. For instance if nicotine strength overcomes the resistance of the coils, it may cause over - vaping and possibly damage the coil. For example some e liquids might contain additives or flavorings that could react with the materials in question which could cause clogs or other problems in the Geek Bar. Before using any new type of e - liquid in your Geek Bar, it is always advisable to see if the manufacturer recommends compatibility with e - liquids.
D - Airflow - The Breath of Vaping
Blocked Airflow
For a Geek Bar to work properly, it requires adequate airflow. A blockage in the airflow will prevent the correct amount of air from entering and mixing with the e-liquid to facilitate a satisfying vaping experience. How is airflow being obstructed? One frequent culprit is debris entering the airflow channels. It can be anything from lint dust to small dried and hardened e - liquid particles. Another option is that the mouthpiece might be blocked. If you have been using your Geek Bar in a dirty area or have not cleaned out the mouthpiece on a regular basis then this can clog.
To clear an air blockage try an easy puff on the Geek Bar without firing the device (not inhaling hard enough to turn on the battery). Inluding: If you are restricting airways significantly the clogged airflow will be causing a lot of strain. You may try cleaning the mouthpiece and airflow channels with a small soft brush or piece of thin wire (taking care not to damage it). It may be necessary, in certain cases, to partially disassemble the device (if possible) to clean the deeper airflow components.
Airflow Adjustment Issues
Some Geek Bars features adjustable airflow settings. If you have just a changed the air flow and now you are not hitting right the fault could be either restrictive or too open. If airflow is too tight there wont be enough air mixed with vapor to take a decent hit or any hit at all. On the other hand, a wide-open chamber can dilute the vapor and compromise the potency of the hit. Just use whatever airflow, works for you the best! If you are not sure what the best balance is look up the devices user guide.
E- Device Malfunctions - The Basics And More
Sensor Problems
Geek Bars have sensors that sense when the user draws a breath. If these sensors fail the device may not activate the coil to generate liquid vapor. Sensor issues can be caused by a number of factors. This can happen, sometimes moisture can get into the sensor area specially if youve been using your Geek Bar in a humid environment or if you have splashed some e - liquid accidently on the device. Moisture can disrupt the electrical connections in the sensor and prevent it from working. In some cases, the sensor may bad from the factory. As sensor issues require technical knowledge to diagnose as well as fix they are probably best left for professionals to deal with and if the device is under warranty the manufacturer.
Internal Wiring Issues
The internal wiring of Geek Bar carries electrical current from the battery to the coil. Note that if there are any loose connections, breaks or damages to the wiring, the device will not work. This can be a result of physical damage to the device, like dropping it. Even a small fall can move internal parts enough to possibly disconnect some wiring. Another possibility can be manufacturing defects. If you think your device has internal wiring issues, don't take matters into your own hands and try to open the device for repair. Instead contact the manufacturer or a qualified technician for help.
There are many things to look at when your Geek Bar isnt hitting. If one of these particular components is not functioning properly, it can lead to the e cigarette not working. By methodically going through these aspects users are often able to troubleshoot the problem returning them to their Geek Bar vape experience. But if the troublestill appears even after going through all the troubleshootsteps you may need to think about buying(new device o professional help).
